Ashly Mixer/Amplifier 12-In x 4-Out, DSP, Network, 2 x 150W @ 2, 4, 8 ohm, 70v/100v

Item No.mXa-1502
The mXa-1502 with Ashly AquaControl™ software gives your customers multi-zone music distribution, paging, sound-masking and automatic mixing for a wide-range of environments. Head to the Ashly website for the latest firmware downloads . Process 12 audio inputs into four different areas with a single

Description

The mXa-1502 with Ashly AquaControl™ software gives your customers multi-zone music distribution, paging, sound-masking and automatic mixing for a wide-range of environments.

Head to the Ashly website for the latest firmware downloads.

Process 12 audio inputs into four different areas with a single rack space device that includes two Ashly-reliable 150-watt amplifiers capable of driving 2,4 and 8-ohm as well as 25, 70 and 100V loads.

The mXa-1502 with AquaControl™ provides total control over four separate zones with a rich compliment of digital signal processing, including routing, automixing, ducking, amplifier monitoring, event scheduling/triggering and more. All through our easy-to-use AquaControl™ that doesn't require a week of tutorials to understand and configure. It lets you and your customers navigate using virtually any browser-enabled device. Trouble-shoot or re-configure it without having to travel to the client location. Or add our hard-wired WR-1.1 single-gang remote.

  • Damping Factor: >250 (8 Ohm load <1kHz)
  • Distortion (SMPTE, typical): <0.5%
  • Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)
  • Channel Separation: -75dB (dB from full output, 1kHz)
  • Signal-to-Noise (unweighted): 20Hz-20kHz, Gain@26dB
  • Frequency Response: 20Hz-20kHz, ñ0.05dB
  • Balanced Input Connector: Euroblock 3.5mm
  • Input Impedance: 10k Ohms
  • Maximum Input Level: +21dBu
  • Speaker Output Connector: Euroblock 7.62mm
  • Nominal Voltage Input: 100 - 240VAC
  • Operating Range: 70 - 270VAC
  • Power Supply Type: SMPS with active PFC
  • AC Mains Line Cord Connector: Detachable Nema 5-15 for USA
  • Control Network: RJ-45 connector, 1GB Ethernet
  • AUX Output Connector: Balanced Euroblock 3.5mm
  • AUX Output Maximum Level: +21dBu
  • Data Connection: Euroblock 3.5mm - Gnd, +18V, Data Out, Data In
  • Fault Condition Logic Outputs: Euroblock 3.5mm - fault indicated by loss of 1Hz "?heartbeat" pulse signal
  • Remote DC Level Control: Euroblock 3.5mm - Gnd, CV, V+ per input
  • Amplifier Protection: Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
  • Cooling: Continuously variable temperature controlled fan
  • Unit Dimensions: 19"W x 1.75"H x 14.54"D (483mm x 5mm x 369mm)
  • Dimensions: 25.2"W x 2.5"H x 19.5"D / 641mm x 64mm x 495mm
  • Weight : 13.0 lbs (5.4 kg)

Product Details

RRP
$ 5177.00
Brand
Ashly
Product Category
Mixer Amplifier
Product Group
mXa Series
Item No.mXa-1502

Ashly Mixer/Amplifier 12-In x 4-Out, DSP, Network, 2 x 150W @ 2, 4, 8 ohm, 70v/100v

The mXa-1502 with Ashly AquaControl™ software gives your customers multi-zone music distribution, paging, sound-masking and automatic mixing for a wide-range of environments. Head to the Ashly website for the latest firmware downloads . Process 12 audio inputs into four different areas with a single

Description

The mXa-1502 with Ashly AquaControl™ software gives your customers multi-zone music distribution, paging, sound-masking and automatic mixing for a wide-range of environments.

Head to the Ashly website for the latest firmware downloads.

Process 12 audio inputs into four different areas with a single rack space device that includes two Ashly-reliable 150-watt amplifiers capable of driving 2,4 and 8-ohm as well as 25, 70 and 100V loads.

The mXa-1502 with AquaControl™ provides total control over four separate zones with a rich compliment of digital signal processing, including routing, automixing, ducking, amplifier monitoring, event scheduling/triggering and more. All through our easy-to-use AquaControl™ that doesn't require a week of tutorials to understand and configure. It lets you and your customers navigate using virtually any browser-enabled device. Trouble-shoot or re-configure it without having to travel to the client location. Or add our hard-wired WR-1.1 single-gang remote.

  • Damping Factor: >250 (8 Ohm load <1kHz)
  • Distortion (SMPTE, typical): <0.5%
  • Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)
  • Channel Separation: -75dB (dB from full output, 1kHz)
  • Signal-to-Noise (unweighted): 20Hz-20kHz, Gain@26dB
  • Frequency Response: 20Hz-20kHz, ñ0.05dB
  • Balanced Input Connector: Euroblock 3.5mm
  • Input Impedance: 10k Ohms
  • Maximum Input Level: +21dBu
  • Speaker Output Connector: Euroblock 7.62mm
  • Nominal Voltage Input: 100 - 240VAC
  • Operating Range: 70 - 270VAC
  • Power Supply Type: SMPS with active PFC
  • AC Mains Line Cord Connector: Detachable Nema 5-15 for USA
  • Control Network: RJ-45 connector, 1GB Ethernet
  • AUX Output Connector: Balanced Euroblock 3.5mm
  • AUX Output Maximum Level: +21dBu
  • Data Connection: Euroblock 3.5mm - Gnd, +18V, Data Out, Data In
  • Fault Condition Logic Outputs: Euroblock 3.5mm - fault indicated by loss of 1Hz "?heartbeat" pulse signal
  • Remote DC Level Control: Euroblock 3.5mm - Gnd, CV, V+ per input
  • Amplifier Protection: Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
  • Cooling: Continuously variable temperature controlled fan
  • Unit Dimensions: 19"W x 1.75"H x 14.54"D (483mm x 5mm x 369mm)
  • Dimensions: 25.2"W x 2.5"H x 19.5"D / 641mm x 64mm x 495mm
  • Weight : 13.0 lbs (5.4 kg)

Product Details

RRP
$ 5177.00
Brand
Ashly
Product Category
Mixer Amplifier
Product Group
mXa Series