2-Channel Balance Line Input to Dante^® Interface

The AtlasIED TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante^® digital audio.

The TSD-DAC2i can be used for any Analog to Dante^® digital audio end point but is ideally suited to be used with the AtlasIED WTSD wall mixer series. Once converted into Dante^® digital audio, the audio can be transmitted over IP networks and routed in the Dante^® Controller software. The TSD-DAC2i Dante^® transmitter I/O module features two analog balanced line inputs with a variable gain to operate from line to mic level. An Input Clip indicator illuminates when clipping signals are present. There are indicators for Power and Network connection. The TSD-DAC2i requires no external power supply, it is powered via a network PoE port or a PoE cable power injector.

Features

• Dante^® digital audio platform
• 2 CH Balanced Analog Line Input
• Wide range gain adjust -20dB to +20dB
• AUX, Line & Mic Levels
• Input Clip Indicator
• PoE Powered
• Mounting Plate
• Incorporates with WTSD Wall Mixers

Specifications

• Network Interface: Single RJ-45
• Input Impedance: 15kΩ (Analog)
• Frequency Response: 20Hz - 20kHz (+/- 2dB)
• THD: 0.06% @ 1kHz
• Signal To Noise Ratio: 95dB @ 1kHz (A Weighted)
• Dynamic Range: 100dB (-60dBFS A Weighted)
• Power Source: PoE (52V 36mA)
• Power Consumption: 1.9W
• Height: 1" (25mm)
• Width: 3.6" (93mm)
• Depth: 3.17" (81mm)
• Weight: 0.44 lbs (0.20kg)
• Shipping Weight: 0.7 lbs (0.32kg)
• Warranty Period: 36 months from date of purchase