Cloud 3 zone mixer. 6 Stereo line inputs. 2 mic inputs. 3 output zones
Click below for direct download from our manufacturers.
Description
3 Zone Mixer
The CX263 is the ideal solution for leisure, licensed and retail venues. This compact unit has 6 line level inputs and 2 mic inputs with paging microphone access on Mic 1. The CX263 has one stereo and two mono zones. The line inputs and mics can be independently routed to any output zone via the front panel controls, alternatively the music signals on each zone can be controlled remotely by the RL-1 (level only) or RSL-6 (source and level).
Additional remote control functions can be provided by the optional serial interface card (RS232) CDI-S200 shown fitted on the rear panel which can control the music level and source on each zone, access for Mic 1 on each zone, and access for Mic 2 on each zone. This compact unit is easy to install and operate but has the flexibility to provide a solution for many differing environments.
Full specifications are available under the Downloads tab above Line Inputs:- Frequency Response: 20Hz-22kHz, +0, -0.5dB
- Distortion: 20Hz-22kHz, <0.05% Typical
- Sensitivity: 100mV (-17.8dBu) to 1.5V (+6dBu)
- Input Gain Control: 24dB range
- Input Impedance: 48kW
- Headroom: >20dB
- Noise: 20Hz-22kHz (0dB gain), -88dB rms typical
- Equalisation: LF: ñ10dB 50Hz, HF: ñ10dB 10kHz
- Frequency Response: 100Hz -3dB (filter), 20kHz ñ0.5dB
- Distortion: 20Hz-22kHz, <0.05%
- Gain Range: 10dB to 50dB
- Input Impedance: >2kW (balanced)
- Common Mode Rejection: 1kHz, >70dB
- Headroom: >20dB
- Noise: 20Hz-22kHz (0dB gain), -128dB EIN
- Equalisation: LF: ñ10dB 150Hz, HF: ñ10dB 5kHz
- Nominal Output Level: 0dBu
- Minimum load impedance: 1k2W
- Maximum Output Level: +20dBu
- Power Input: 230V/115V ñ10%
- Fuse Rating: T100mA 230V T200mA 115V
- Fuse Type: 20mm x 5mm 250V
- Dimensions: 482.60mm x 44.00mm(1U) x 152.5mm
- Weight (kg): 2.15
Product Details
- RRP
- $ 1537.00
- Brand
- Cloud
- Product Group
- CX Series
- Product Category
- Mixer - Zone Mixer
Cloud 3 zone mixer. 6 Stereo line inputs. 2 mic inputs. 3 output zones
Product Details
- RRP
- $ 1537.00
- Brand
- Cloud
- Product Group
- CX Series
- Product Category
- Mixer - Zone Mixer
Description
3 Zone Mixer
The CX263 is the ideal solution for leisure, licensed and retail venues. This compact unit has 6 line level inputs and 2 mic inputs with paging microphone access on Mic 1. The CX263 has one stereo and two mono zones. The line inputs and mics can be independently routed to any output zone via the front panel controls, alternatively the music signals on each zone can be controlled remotely by the RL-1 (level only) or RSL-6 (source and level).
Additional remote control functions can be provided by the optional serial interface card (RS232) CDI-S200 shown fitted on the rear panel which can control the music level and source on each zone, access for Mic 1 on each zone, and access for Mic 2 on each zone. This compact unit is easy to install and operate but has the flexibility to provide a solution for many differing environments.
Full specifications are available under the Downloads tab above Line Inputs:- Frequency Response: 20Hz-22kHz, +0, -0.5dB
- Distortion: 20Hz-22kHz, <0.05% Typical
- Sensitivity: 100mV (-17.8dBu) to 1.5V (+6dBu)
- Input Gain Control: 24dB range
- Input Impedance: 48kW
- Headroom: >20dB
- Noise: 20Hz-22kHz (0dB gain), -88dB rms typical
- Equalisation: LF: ñ10dB 50Hz, HF: ñ10dB 10kHz
- Frequency Response: 100Hz -3dB (filter), 20kHz ñ0.5dB
- Distortion: 20Hz-22kHz, <0.05%
- Gain Range: 10dB to 50dB
- Input Impedance: >2kW (balanced)
- Common Mode Rejection: 1kHz, >70dB
- Headroom: >20dB
- Noise: 20Hz-22kHz (0dB gain), -128dB EIN
- Equalisation: LF: ñ10dB 150Hz, HF: ñ10dB 5kHz
- Nominal Output Level: 0dBu
- Minimum load impedance: 1k2W
- Maximum Output Level: +20dBu
- Power Input: 230V/115V ñ10%
- Fuse Rating: T100mA 230V T200mA 115V
- Fuse Type: 20mm x 5mm 250V
- Dimensions: 482.60mm x 44.00mm(1U) x 152.5mm
- Weight (kg): 2.15