Crest Power Amp 2 x 2600w 4ohms, 2 x 1500w 8ohms 2 x 3745w 100V
Description
High Efficient Install Power Amplifier
The Crest Audio® CLh™ Series power amplifiers set a new standard for performance and efficiency for the contracting and installation market. CLh amplifiers feature an ultra-high efficiency amplifier output circuit that reduces weight while, increasing output power, reliability and thermal efficiency.
The Crest Audio CLh 6000C is a ultra-high efficiency, servo-controlled, class-D power amplifier that delivers high power through two channels to balanced outputs for the ultimate in common-mode noise cancellation. It is equipped with Power Factor Corrections for world markets where PFC is required. The CLh 3000C operates on 230V/50 Hz power to drive 100V constant voltage systems.
The CLh Series includes Crest Audio’s exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage; over-current protection; DC voltage; channel active and temperature warning. Additional features include a lightweight switch-mode power-supply, remote turn-on, sequential turn-on, and a switchable, built-in low-cut filter.
Features
- Ultra-high efficiency, servo-controlled, class-D power amplifiers that deliver high power through two channels
- CLh 6000C produces 3745 Watts per channel continuous at 100V
- Crest Audio’s exclusive ACL (Active Clip Limiting)
- Over-current protection
- DC voltage
- Channel Active and temperature warning
- Light-weight switch-mode power supply
- Remote turn-on
- Sequential turn-on
- Switchable, built-in low-cut filter
Specifications
- Channels (Input): 2
- Channels (Output): 2
- Power per Channel @ 2 Ω: 3,745 W
- Power per Channel @ 4 Ω: 2,600 W
- Power per Channel @ 8 Ω: 1,500 W
- Power per Channel @ 100V: 3,745 W
- Topology: Class D
- Minimum Load Impedance: 2.67 Ω
- Frequency Response: -3 dB, 20 Hz – 25 kHz; ±0 dB
- Input Connectors: 2 x 3-pin Euro Connector
- Output Connectors: 2 x 2-pin Barrier Strips
- Rack Mount (19"): Yes (2U)
- Net Weight: 14.1 lbs (6.40 kg)
- Product Height: 3.48" (88 mm)
- Product Width: 19.00" (483 mm)
- Product Depth: 20.30" (516 mm)
- AC Power Input: 230VAC 50 Hz
- SKU: 03608422
Product Details
- RRP
- $ 5027.00
- Brand
- Crest Audio
- Product Group
- CLh™
- Product Category
- Amplifier - Install
Crest Power Amp 2 x 2600w 4ohms, 2 x 1500w 8ohms 2 x 3745w 100V
Product Details
- RRP
- $ 5027.00
- Brand
- Crest Audio
- Product Group
- CLh™
- Product Category
- Amplifier - Install
Description
High Efficient Install Power Amplifier
The Crest Audio® CLh™ Series power amplifiers set a new standard for performance and efficiency for the contracting and installation market. CLh amplifiers feature an ultra-high efficiency amplifier output circuit that reduces weight while, increasing output power, reliability and thermal efficiency.
The Crest Audio CLh 6000C is a ultra-high efficiency, servo-controlled, class-D power amplifier that delivers high power through two channels to balanced outputs for the ultimate in common-mode noise cancellation. It is equipped with Power Factor Corrections for world markets where PFC is required. The CLh 3000C operates on 230V/50 Hz power to drive 100V constant voltage systems.
The CLh Series includes Crest Audio’s exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage; over-current protection; DC voltage; channel active and temperature warning. Additional features include a lightweight switch-mode power-supply, remote turn-on, sequential turn-on, and a switchable, built-in low-cut filter.
Features
- Ultra-high efficiency, servo-controlled, class-D power amplifiers that deliver high power through two channels
- CLh 6000C produces 3745 Watts per channel continuous at 100V
- Crest Audio’s exclusive ACL (Active Clip Limiting)
- Over-current protection
- DC voltage
- Channel Active and temperature warning
- Light-weight switch-mode power supply
- Remote turn-on
- Sequential turn-on
- Switchable, built-in low-cut filter
Specifications
- Channels (Input): 2
- Channels (Output): 2
- Power per Channel @ 2 Ω: 3,745 W
- Power per Channel @ 4 Ω: 2,600 W
- Power per Channel @ 8 Ω: 1,500 W
- Power per Channel @ 100V: 3,745 W
- Topology: Class D
- Minimum Load Impedance: 2.67 Ω
- Frequency Response: -3 dB, 20 Hz – 25 kHz; ±0 dB
- Input Connectors: 2 x 3-pin Euro Connector
- Output Connectors: 2 x 2-pin Barrier Strips
- Rack Mount (19"): Yes (2U)
- Net Weight: 14.1 lbs (6.40 kg)
- Product Height: 3.48" (88 mm)
- Product Width: 19.00" (483 mm)
- Product Depth: 20.30" (516 mm)
- AC Power Input: 230VAC 50 Hz
- SKU: 03608422