d&b audiotechnik 24S Loudspeaker

Item No.Z1610.000
  • Components 2 x 12″/1.4″ 
  • Dispersion   75° x 45°
  • SPLmax 138 dB
  • Weight 33 kg / 73 lb

Description

Installation Specific High Performance Full Range 2-Way Loudspeaker
 
The 24S is a high performance full range 2-way passive loudspeaker housing two 12” drivers in a bass-reflex enclosure with a 1.4” exit compression driver mounted onto a large rotatable CD horn, intended for a wide range of permanently installed applications. The dipolar arrangement of the 12” drivers results in directivity control down to approximately 500 Hz in the same plane as the dipole. The specially designed ports with optimized flow characteristics and a large cabinet volume provide a significant low frequency reproduction. With a frequency response extending from 55 Hz to 18 kHz, the 24S can be used as a stand-alone, full range system, or supplemented with d&b subwoofers. It can be ground stacked or flown individually. The rotatable HF horn can be rotated by 90° to enable horizontal orientation. The loudspeaker cabinet is constructed from marine plywood, and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The top, bottom and both side panels each incorporate a pair of M10 threaded inserts for attaching d&b rigging hardware. The loudspeakers are Ball Impact Resistant according to DIN 18032-3 for sports and multipurpose halls. The Weather Resistant (WR) option provides an IP55 rating that enables the operation of loudspeakers in changing ambient conditions, and features a fixed cable.

Amplifiers
The d&b 30D amplifier is recommended to drive the 24S. The d&b D20 and D80 can also be used.

System data 
  • Frequency response (–5 dB standard): 55 Hz – 18 kHz
  • Frequency response (–5 dB CUT mode): 90 Hz – 18 kHz
  • Max. sound pressure (1m, free field) [1]
    with D20/30D: 138dB (24S) / 137dB (24S-D)
    with D80: 138dB (24S) / 137dB (24S-D)
  • Cabinets per amplifier channel: 1
Loudspeaker data
  • Configuration: Installation specific high performance full range 2-way loudspeaker (24S-D with wide dispersion)
  • Nominal impedance: 4 Ω
  • Power handling capacity (RMS/peak 10 ms): 500/2000 W
  • Nominal dispersion angle (h x v): 75° x 45° rotatable (24S) / 110° x 45° rotatable (24S-D)
  • Components:
    2 x 12“ driver with neodymium magnet
    1.4” exit compression driver
    Passive crossover network
  • Connections:
    1 x NL4
    1 x screw terminal block
Dimensions, weight
  • Dimensions (H x W x D): 800 x 410 x 420 mm (31.5 x 16 x 16.5”)
  • Weight: 33 kg (73 lb)
[1] SPL max peak test signal: pink noise with crest factor 4

Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.

Product Details

RRP
$ 9689.00
Brand
d&b audiotechnik
Product Category
Loudspeakers - Point Source
Product Group
xS Series
Item No.Z1610.000

d&b audiotechnik 24S Loudspeaker

  • Components 2 x 12″/1.4″ 
  • Dispersion   75° x 45°
  • SPLmax 138 dB
  • Weight 33 kg / 73 lb

Description

Installation Specific High Performance Full Range 2-Way Loudspeaker
 
The 24S is a high performance full range 2-way passive loudspeaker housing two 12” drivers in a bass-reflex enclosure with a 1.4” exit compression driver mounted onto a large rotatable CD horn, intended for a wide range of permanently installed applications. The dipolar arrangement of the 12” drivers results in directivity control down to approximately 500 Hz in the same plane as the dipole. The specially designed ports with optimized flow characteristics and a large cabinet volume provide a significant low frequency reproduction. With a frequency response extending from 55 Hz to 18 kHz, the 24S can be used as a stand-alone, full range system, or supplemented with d&b subwoofers. It can be ground stacked or flown individually. The rotatable HF horn can be rotated by 90° to enable horizontal orientation. The loudspeaker cabinet is constructed from marine plywood, and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The top, bottom and both side panels each incorporate a pair of M10 threaded inserts for attaching d&b rigging hardware. The loudspeakers are Ball Impact Resistant according to DIN 18032-3 for sports and multipurpose halls. The Weather Resistant (WR) option provides an IP55 rating that enables the operation of loudspeakers in changing ambient conditions, and features a fixed cable.

Amplifiers
The d&b 30D amplifier is recommended to drive the 24S. The d&b D20 and D80 can also be used.

System data 
  • Frequency response (–5 dB standard): 55 Hz – 18 kHz
  • Frequency response (–5 dB CUT mode): 90 Hz – 18 kHz
  • Max. sound pressure (1m, free field) [1]
    with D20/30D: 138dB (24S) / 137dB (24S-D)
    with D80: 138dB (24S) / 137dB (24S-D)
  • Cabinets per amplifier channel: 1
Loudspeaker data
  • Configuration: Installation specific high performance full range 2-way loudspeaker (24S-D with wide dispersion)
  • Nominal impedance: 4 Ω
  • Power handling capacity (RMS/peak 10 ms): 500/2000 W
  • Nominal dispersion angle (h x v): 75° x 45° rotatable (24S) / 110° x 45° rotatable (24S-D)
  • Components:
    2 x 12“ driver with neodymium magnet
    1.4” exit compression driver
    Passive crossover network
  • Connections:
    1 x NL4
    1 x screw terminal block
Dimensions, weight
  • Dimensions (H x W x D): 800 x 410 x 420 mm (31.5 x 16 x 16.5”)
  • Weight: 33 kg (73 lb)
[1] SPL max peak test signal: pink noise with crest factor 4

Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.

Product Details

RRP
$ 9689.00
Brand
d&b audiotechnik
Product Category
Loudspeakers - Point Source
Product Group
xS Series