d&b audiotechnik 5S Loudspeaker white

Item No.Z1616.001
  • Components 5″/1″ 
  • Dispersion 100° conical
  • SPLmax 118 dB
  • Weight 2.5 kg / 5.5 lb

Description

Installation Specific 2-Way Compact Coaxial Loudspeaker

The 5S is a lightweight 2-way passive loudspeaker using a ferrite LF driver and a coaxially mounted wide dispersion dome tweeter. It employs a 5” driver in a compact bass-reflex enclosure and offers a symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. It can be used stand-alone or supplemented by different subwoofers of the xS-Series. The enclosure is injection moulded with an impact and weather resistant (IP34 rating) black or white paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the rear panel are two M8 threaded inserts, two NL4 connectors and a two pole screw terminal block. The loudspeaker cabinet and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours.

Amplifiers
The d&b 10D and D6 amplifiers are recommended to drive the 5S. The d&b D20, D80 and 30D can also be used.

System data
  • Frequency response (–5 dB standard mode)    80 Hz – 20 kHz
  • Frequency response (–5 dB CUT mode)    130 Hz – 20 kHz
  • Max. sound pressure (1 m, free field) with D6    117 dB
  • Max. sound pressure (1 m, free field) with D12    118 dB
  •    (SPLmax peak, pink noise test signal with crest factor of 4)
  • Input level (100 dB-SPL/1 m)    –6 dBu
Loudspeaker
  • Nominal impedance    16 ohms
  • Power handling capacity (RMS/peak 10 ms)    60/400 W
  • Nominal dispersion angle (hor. x vert.)    100° conical
  • Components 5“ driver with neodymium magnet
  • 1” dome driver, coaxially mounted
  • Passive crossover network
  • Connections    2 x NL4
  •     1 x screw terminal block (ST – up to 4 mm2/AWG 11)
  • Pin assignments    NL4: 1+/1–
  • Weight    2 kg (4.4 lb)

Product Details

RRP
$ 1501.00
Brand
d&b audiotechnik
Product Category
Loudspeakers - Point Source
Product Group
xS Series
Colour
White
Item No.Z1616.001

d&b audiotechnik 5S Loudspeaker white

  • Components 5″/1″ 
  • Dispersion 100° conical
  • SPLmax 118 dB
  • Weight 2.5 kg / 5.5 lb

Description

Installation Specific 2-Way Compact Coaxial Loudspeaker

The 5S is a lightweight 2-way passive loudspeaker using a ferrite LF driver and a coaxially mounted wide dispersion dome tweeter. It employs a 5” driver in a compact bass-reflex enclosure and offers a symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude. It can be used stand-alone or supplemented by different subwoofers of the xS-Series. The enclosure is injection moulded with an impact and weather resistant (IP34 rating) black or white paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the rear panel are two M8 threaded inserts, two NL4 connectors and a two pole screw terminal block. The loudspeaker cabinet and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours.

Amplifiers
The d&b 10D and D6 amplifiers are recommended to drive the 5S. The d&b D20, D80 and 30D can also be used.

System data
  • Frequency response (–5 dB standard mode)    80 Hz – 20 kHz
  • Frequency response (–5 dB CUT mode)    130 Hz – 20 kHz
  • Max. sound pressure (1 m, free field) with D6    117 dB
  • Max. sound pressure (1 m, free field) with D12    118 dB
  •    (SPLmax peak, pink noise test signal with crest factor of 4)
  • Input level (100 dB-SPL/1 m)    –6 dBu
Loudspeaker
  • Nominal impedance    16 ohms
  • Power handling capacity (RMS/peak 10 ms)    60/400 W
  • Nominal dispersion angle (hor. x vert.)    100° conical
  • Components 5“ driver with neodymium magnet
  • 1” dome driver, coaxially mounted
  • Passive crossover network
  • Connections    2 x NL4
  •     1 x screw terminal block (ST – up to 4 mm2/AWG 11)
  • Pin assignments    NL4: 1+/1–
  • Weight    2 kg (4.4 lb)

Product Details

RRP
$ 1501.00
Brand
d&b audiotechnik
Product Category
Loudspeakers - Point Source
Product Group
xS Series
Colour
White