d&b audiotechnik Yi10P Loudspeaker

Item No.Z0713.001
  • Components 2 x 8″/1.4″
  • Dispersion 110° x 40°
  • SPLmax 136 dB
  • Weight 18 kg / 40 lb

Description

Installation Specific High Performance 2-Way Passive Point Source Loudspeaker with Wide Dispersion

The compact, 2-way passive Yi10P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. The Yi10P is the installation version of the Y10P loudspeaker and differs only in cabinet construction, finish and mounting hardware. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 110° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation. The Yi10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the Y-Series, either ground stacked or flown. The loudspeaker cabinet is constructed from marine plywood and has an impact resistant paint finish while Weather Resistant (WR) and Special Color (SC) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.

Amplifiers
The d&b D80 and 30D amplifiers are recommended to drive the Yi10P. The d&b D20, 10D and D6 can also be used.

System data
  • Frequency response (-5 dB standard): 59 Hz – 18 kHz
  • Frequency response (-5 dB CUT mode): 118 Hz – 18 kHz
  • Max. sound pressure (1m, free field) [1]
    with D6: 131 dB SPL
    with D12: 134 dB SPL
    with D80: 136 dB SPL
  • Cabinets per channel D6/D12/D80: 2
Loudspeaker data
  • Nominal impedance: 8 ohms
  • Power handling capacity LF (RMS/peak 10 ms): 400/1600 W
  • Nominal dispersion angle (h x v): 110° x 40°
  • Components:
    2 x 8″ driver with neodymium magnet
    1.4″ compression driver
    passive crossover network
  • Connections: 2 x NL4 and screw terminal block
Dimensions, weight
  • Dimensions (H x W x D): 580 x 257 x 341 mm (22.8 x 10 x 13.4″)
  • Weight: 17 kg (37.5 lb)
[1] SPL max peak test signal: pink noise with crest factor 4

Product Details

RRP
$ 8908.00
Brand
d&b audiotechnik
Product Category
Loudspeakers - Point Source
Product Group
Y Series
Item No.Z0713.001

d&b audiotechnik Yi10P Loudspeaker

  • Components 2 x 8″/1.4″
  • Dispersion 110° x 40°
  • SPLmax 136 dB
  • Weight 18 kg / 40 lb

Description

Installation Specific High Performance 2-Way Passive Point Source Loudspeaker with Wide Dispersion

The compact, 2-way passive Yi10P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. The Yi10P is the installation version of the Y10P loudspeaker and differs only in cabinet construction, finish and mounting hardware. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 110° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation. The Yi10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the Y-Series, either ground stacked or flown. The loudspeaker cabinet is constructed from marine plywood and has an impact resistant paint finish while Weather Resistant (WR) and Special Color (SC) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.

Amplifiers
The d&b D80 and 30D amplifiers are recommended to drive the Yi10P. The d&b D20, 10D and D6 can also be used.

System data
  • Frequency response (-5 dB standard): 59 Hz – 18 kHz
  • Frequency response (-5 dB CUT mode): 118 Hz – 18 kHz
  • Max. sound pressure (1m, free field) [1]
    with D6: 131 dB SPL
    with D12: 134 dB SPL
    with D80: 136 dB SPL
  • Cabinets per channel D6/D12/D80: 2
Loudspeaker data
  • Nominal impedance: 8 ohms
  • Power handling capacity LF (RMS/peak 10 ms): 400/1600 W
  • Nominal dispersion angle (h x v): 110° x 40°
  • Components:
    2 x 8″ driver with neodymium magnet
    1.4″ compression driver
    passive crossover network
  • Connections: 2 x NL4 and screw terminal block
Dimensions, weight
  • Dimensions (H x W x D): 580 x 257 x 341 mm (22.8 x 10 x 13.4″)
  • Weight: 17 kg (37.5 lb)
[1] SPL max peak test signal: pink noise with crest factor 4

Product Details

RRP
$ 8908.00
Brand
d&b audiotechnik
Product Category
Loudspeakers - Point Source
Product Group
Y Series