d&b audiotechnik Yi10P Loudspeaker
Click below for direct download from our manufacturers.
Description
Installation Specific High Performance 2-Way Passive Point Source Loudspeaker with Wide Dispersion
The compact, 2-way passive Yi10P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. The Yi10P is the installation version of the Y10P loudspeaker and differs only in cabinet construction, finish and mounting hardware. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 110° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation. The Yi10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the Y-Series, either ground stacked or flown. The loudspeaker cabinet is constructed from marine plywood and has an impact resistant paint finish while Weather Resistant (WR) and Special Color (SC) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.
Amplifiers
The following amplifiers can be used to drive the Yi10P:
- Installation: 10D, 30D, 40D
Features
- Components: 2 x 8″/1.4″
- Dispersion: 110° x 40°
- SPLmax: 136 dB
- Weight: 18 kg / 40 lb
Specifications
System data- Frequency response (-5 dB standard): 59 Hz - 18 kHz
- Frequency response (-5 dB CUT mode): 118 Hz - 18 kHz
-
Max. sound pressure [1]:
with 10D: 131 dB
with D20/30D: 134 dB
with D40/D80/40D: 136 dB - Cabinets per amplifier channel: 2
- Configuration: Installation specific high performance 2-way passive point source loudspeaker with wide dispersion
- Nominal impedance: 8 Ω
- Power handling capacity (RMS/peak 10 ms): 400/1600 W
- Nominal dispersion angle (h x v): 110° x 40°
-
Components:
2 x 8" driver with neodymium magnet
1.4" exit compression driver
passive crossover network -
Connections: 2 x NLT4 F/M
screw terminal block
- Dimensions (H x W x D): 580 x 257 x 341 mm / 22.8 x 10 x 13.4"
- Weight: 18 kg / 40 lb
Product Details
- RRP
- $ 10535.00
- Brand
- d&b audiotechnik
- Product Group
- Y Series
- Product Category
- Loudspeakers - Point Source
d&b audiotechnik Yi10P Loudspeaker
Click below for direct download from our manufacturers.
Description
Installation Specific High Performance 2-Way Passive Point Source Loudspeaker with Wide Dispersion
The compact, 2-way passive Yi10P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. The Yi10P is the installation version of the Y10P loudspeaker and differs only in cabinet construction, finish and mounting hardware. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 110° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation. The Yi10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the Y-Series, either ground stacked or flown. The loudspeaker cabinet is constructed from marine plywood and has an impact resistant paint finish while Weather Resistant (WR) and Special Color (SC) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.
Amplifiers
The following amplifiers can be used to drive the Yi10P:
- Installation: 10D, 30D, 40D
Features
- Components: 2 x 8″/1.4″
- Dispersion: 110° x 40°
- SPLmax: 136 dB
- Weight: 18 kg / 40 lb
Specifications
System data- Frequency response (-5 dB standard): 59 Hz - 18 kHz
- Frequency response (-5 dB CUT mode): 118 Hz - 18 kHz
-
Max. sound pressure [1]:
with 10D: 131 dB
with D20/30D: 134 dB
with D40/D80/40D: 136 dB - Cabinets per amplifier channel: 2
- Configuration: Installation specific high performance 2-way passive point source loudspeaker with wide dispersion
- Nominal impedance: 8 Ω
- Power handling capacity (RMS/peak 10 ms): 400/1600 W
- Nominal dispersion angle (h x v): 110° x 40°
-
Components:
2 x 8" driver with neodymium magnet
1.4" exit compression driver
passive crossover network -
Connections: 2 x NLT4 F/M
screw terminal block
- Dimensions (H x W x D): 580 x 257 x 341 mm / 22.8 x 10 x 13.4"
- Weight: 18 kg / 40 lb
Product Details
- RRP
- $ 10535.00
- Brand
- d&b audiotechnik
- Product Group
- Y Series
- Product Category
- Loudspeakers - Point Source