d&b audiotechnik Ti10L Loudspeaker NL4
Click below for direct download from our manufacturers.
Description
Installation Specific 2-Way Line Array Loudspeaker
The Ti10L loudspeaker is the installation version of the T10 for deployment as a line array loudspeaker. Road and installation versions differ only in the mounting hardware. The Ti10L cabinet is a passive 2-way design that houses 2 x 6.5″ drivers and a 1.4″ exit HF compression driver. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in line array mode to 105°. The two 6.5″ neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control even at lower frequencies. The Ti10L cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated line array rigging hardware, which, once deployed, is fundamentally invisible when viewed from the front. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Mounted on the rear panel are two NL4 connectors wired in parallel. Special Color (SC) or Weather Resistant (WR) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.
Amplifiers
The following amplifiers can be used to drive the Ti10L:
- Installation: 5D, 10D, 30D, 40D
Features
- Components: 2 x 6.5″/1.4″
- Dispersion: 105°
- SPLmax: 132 dB
- Weight: 11 kg / 24 lb
Specifications
System data- Frequency response (-5 dB standard): 68 Hz - 18 kHz
- Frequency response (-5 dB CUT mode): 120 Hz - 18 kHz
-
Max. sound pressure [1]:
with 10D: 129 dB
with D20/5D/30D: 132 dB
with D40/D80/40D: 132 dB - Cabinets per amplifier channel: 4
- Configuration: Installation specific 2-way line array loudspeaker
- Nominal impedance: 16 Ω
- Power handling capacity (RMS/peak 10 ms): 200/800 W
- Nominal dispersion angle (horizontal): 105°
- Splay angle settings: 0 - 15° (1° increment)
-
Components:
2 x 6.5" driver with neodymium magnet
1.4" exit compression driver on rotatable waveguide
passive crossover network - Connections: 2 x NL4
- Dimensions (H x W x D): 197 x 470 x 300 mm / 7.8 x 18.5 x 11.8"
- Weight: 11 kg / 24 lb
Product Details
- RRP
- $ 9042.00
- Brand
- d&b audiotechnik
- Product Group
- T Series
- Product Category
- Loudspeakers - Line Array
d&b audiotechnik Ti10L Loudspeaker NL4
Product Details
- RRP
- $ 9042.00
- Brand
- d&b audiotechnik
- Product Group
- T Series
- Product Category
- Loudspeakers - Line Array
Description
Installation Specific 2-Way Line Array Loudspeaker
The Ti10L loudspeaker is the installation version of the T10 for deployment as a line array loudspeaker. Road and installation versions differ only in the mounting hardware. The Ti10L cabinet is a passive 2-way design that houses 2 x 6.5″ drivers and a 1.4″ exit HF compression driver. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in line array mode to 105°. The two 6.5″ neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control even at lower frequencies. The Ti10L cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated line array rigging hardware, which, once deployed, is fundamentally invisible when viewed from the front. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Mounted on the rear panel are two NL4 connectors wired in parallel. Special Color (SC) or Weather Resistant (WR) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.
Amplifiers
The following amplifiers can be used to drive the Ti10L:
- Installation: 5D, 10D, 30D, 40D
Features
- Components: 2 x 6.5″/1.4″
- Dispersion: 105°
- SPLmax: 132 dB
- Weight: 11 kg / 24 lb
Specifications
System data- Frequency response (-5 dB standard): 68 Hz - 18 kHz
- Frequency response (-5 dB CUT mode): 120 Hz - 18 kHz
-
Max. sound pressure [1]:
with 10D: 129 dB
with D20/5D/30D: 132 dB
with D40/D80/40D: 132 dB - Cabinets per amplifier channel: 4
- Configuration: Installation specific 2-way line array loudspeaker
- Nominal impedance: 16 Ω
- Power handling capacity (RMS/peak 10 ms): 200/800 W
- Nominal dispersion angle (horizontal): 105°
- Splay angle settings: 0 - 15° (1° increment)
-
Components:
2 x 6.5" driver with neodymium magnet
1.4" exit compression driver on rotatable waveguide
passive crossover network - Connections: 2 x NL4
- Dimensions (H x W x D): 197 x 470 x 300 mm / 7.8 x 18.5 x 11.8"
- Weight: 11 kg / 24 lb