2-way active speaker equipped with one 15" woofer and one 1" compression driver (1.35" voice coil)

The system is driven by a powerful and efficient 800 W amplifier featuring dBTechnologies' advanced DSP processing where linear phase FIR filters allow the systems to deliver a coherent audio performance, uniform and crystal-clear from every listening position.

Moreover, users are enabled to enhance lower and upper frequencies with the convenient DSP preset function.

All cabinets feature 3 INPUT channels with independent level management: CH 1 is a balanced combo XLR/6.3 mm Jack line/mic INPUT with a switch to select source; Ch 2 is a balanced XLR and TRS jack IN; CH 3 allows to connect any device via Bluetooth® connection.

A balanced link XLR-M Output allows connection to a second loudspeaker or a mixer. A slide switch allow to select which signal is sent to the main output: LINK (the signal is taken before any level control) MIX (the signal is determined by the level control of each channel and Main).

The solid and versatile cabinets come with a clean and contemporary full grille design, enhancing both portability thanks to 3 integrated 3 handles (1x side and 1 on top) and multi-functionality: each cabinet can be used horizontally as a stage monitor (on both sides) and features a pole mount cup with 2 tilt angle options (0 and 7.5) to use KL on tripods or stacked on dBTechnologies Subs.

KL comes with its soft cover equipped with a pocket specially designed for cable storage.

Technical Data

• Speaker Type: 2-Way Active Speaker

• Frequency Response [-10dB]: 48 - 18.000Hz
• Max SPL: 128dB
• HF: 1" CD, 1.35"v.c
• LF: 15", 2.5" v.c.
• Dispersion: 90° x 60°
• Crossover Frequency: 1800Hz (24dB/oct.)

Amplifier

• Amp Technology: Class D (LF) + Class AB (HF)
• Power Peak (LF+HF): 800W

Processor

• Controls: 1x volume, 1x slide switch mic/line
• Indicators: Power on/signal/limiter LEDs
• Controller: DSP 20/56 bit
• AD/DA Converter: 24 bit/ 48Hz
• Systems Presets: Playback, Flat, Bass Boost, Wedge
• Limiter: Peak, RMS, Thermal
• Advanced DSP Functions: Linear Phase FIR Filters

Input

• Signal Input:1x Combo (XLR/Jack)Mic/Line1x XLR/TRS
• Bluetooth Input: 1x Bluetooth receiver
• SIGNAL Out: 1x XLR Male (LINK/MIX)

Mechanics

• Housing: Polypropylene
• Handles: 3 (2 on side 1 on top)
• Angles Up: Monitor Use 45°
• Pole Mount: 36 mm, double positioning
• Width: 430mm (16.92")
• Height: 722mm (28.44")
• Depth: 402mm (15.82")
• Weight: 19.3kg (42.54lbs)

Note: Data is not binding; dBTechnologies reserves the right to modify data at any time without notice.