DB Technologies Reflex Subwoofer. 1x 18" woofers with a 4" voice coil
Click below for direct download from our manufacturers.
Description
The system's acoustic engine is driven by a Digipro G4® 1600W Class D amplifier, equipped with PFC (Power Factor Correction) and SMPS which make the cabinet highly resistant to line voltage fluctuations.
Digipro G4 preamplifier features a slot module, equipped with a RDNet expansion card as default, allowing system monitoring and control via Aurora Net. Furthermore, the system is ready for Audinate Dante™ Expansion Card allowing integration in a digital audio network.
The amplifier also allows users to run a real-time test on electronics and transducers, both remotely via Aurora Net, or directly on the amplifier module. VIO S118R shows an on-board delay module, allowing to reach a max 62 ms delay via Aurora Net and a max 9.9 ms delay with 0.1 ms steps via on-board rotary.
The on-board cardioid preset processes the backward sub in inverted stack cardioid configurations, to achieve the best possible cancellation on the rear side automatically.
Technical Data
- Speaker Type: Active Bass Reflex Subwoofer
Acoustical Data
- Frequency Response [- 6 dB]: 35 Hz to Cut Freq (X-Over Dependent)
- Frequency Response [- 10 dB]: 32 Hz
- Max SPL: 139 dB
- LF: 1x18"
- Voice Coil LF: 4 "
- Directivity: Omnidirectional
Amplifier
- Amp Technology: Digipro® G4
- Amp Class: Class D
- RMS Power: 1600 W
- Peak Power: 3200 W
- Cooling: Convection + Internal Fan
- Power Supply: Full-range PSU with PFC
Processor
- Controller: DSP 32 Bit
- AD/DA Converter: 24 bit 96 kHz
- Limiter: RMS, Peak, Thermal
- Delay Option:0- 9.9 ms | steps of 0.1 ms [on-board]0 - 62 ms [via RDNet]
- Crossover Frequency LF-HF: Selectable 60-110Hz + Full range
- LF-Xover out slope: 24 dB/Octave
Input
- Signal Input: 1xXLR balanced
- Signal Output:1x XLR balanced (link or X-over)1xRJ45 LINK (RDNet)
- Expansion Card:RDNet Card (1x RJ45 IN 1x RJ45 Link) [included]Dante card [optional]
- Mains Connections:1x PowerCON TRUE1 In1x PowerCON TRUE1 Out
- Controls:1x Input Attenuation Rotary Switch1x Rotary Encoder (Delay 9.9 ms)1x Polarity Inversion Switch (0° or 180°)1x Cardioid Mode Switch1x X-Over Freq Switch (60-110 Hz + Full Range1x System Auto-test
Mechanics
- Housing:Multiplex plywoodPolyurea painted
- Handles:2x Per SideAluminium
- Pole Mount: M20 Thread
- Raincover: Included
- Width: 720 mm (28.34 in)
- Height: 520 mm (20.47 in)
- Depth: 695 mm (27.36 in)
- Weight: 47 kg (103.62 lbs)
Product Details
- RRP
- $ 10000.00
- Brand
- db Technologies
- Product Group
- ViO S Series
- Product Category
- Loudspeakers - Subwoofers
DB Technologies Reflex Subwoofer. 1x 18" woofers with a 4" voice coil
Product Details
- RRP
- $ 10000.00
- Brand
- db Technologies
- Product Group
- ViO S Series
- Product Category
- Loudspeakers - Subwoofers
Description
The system's acoustic engine is driven by a Digipro G4® 1600W Class D amplifier, equipped with PFC (Power Factor Correction) and SMPS which make the cabinet highly resistant to line voltage fluctuations.
Digipro G4 preamplifier features a slot module, equipped with a RDNet expansion card as default, allowing system monitoring and control via Aurora Net. Furthermore, the system is ready for Audinate Dante™ Expansion Card allowing integration in a digital audio network.
The amplifier also allows users to run a real-time test on electronics and transducers, both remotely via Aurora Net, or directly on the amplifier module. VIO S118R shows an on-board delay module, allowing to reach a max 62 ms delay via Aurora Net and a max 9.9 ms delay with 0.1 ms steps via on-board rotary.
The on-board cardioid preset processes the backward sub in inverted stack cardioid configurations, to achieve the best possible cancellation on the rear side automatically.
Technical Data
- Speaker Type: Active Bass Reflex Subwoofer
Acoustical Data
- Frequency Response [- 6 dB]: 35 Hz to Cut Freq (X-Over Dependent)
- Frequency Response [- 10 dB]: 32 Hz
- Max SPL: 139 dB
- LF: 1x18"
- Voice Coil LF: 4 "
- Directivity: Omnidirectional
Amplifier
- Amp Technology: Digipro® G4
- Amp Class: Class D
- RMS Power: 1600 W
- Peak Power: 3200 W
- Cooling: Convection + Internal Fan
- Power Supply: Full-range PSU with PFC
Processor
- Controller: DSP 32 Bit
- AD/DA Converter: 24 bit 96 kHz
- Limiter: RMS, Peak, Thermal
- Delay Option:0- 9.9 ms | steps of 0.1 ms [on-board]0 - 62 ms [via RDNet]
- Crossover Frequency LF-HF: Selectable 60-110Hz + Full range
- LF-Xover out slope: 24 dB/Octave
Input
- Signal Input: 1xXLR balanced
- Signal Output:1x XLR balanced (link or X-over)1xRJ45 LINK (RDNet)
- Expansion Card:RDNet Card (1x RJ45 IN 1x RJ45 Link) [included]Dante card [optional]
- Mains Connections:1x PowerCON TRUE1 In1x PowerCON TRUE1 Out
- Controls:1x Input Attenuation Rotary Switch1x Rotary Encoder (Delay 9.9 ms)1x Polarity Inversion Switch (0° or 180°)1x Cardioid Mode Switch1x X-Over Freq Switch (60-110 Hz + Full Range1x System Auto-test
Mechanics
- Housing:Multiplex plywoodPolyurea painted
- Handles:2x Per SideAluminium
- Pole Mount: M20 Thread
- Raincover: Included
- Width: 720 mm (28.34 in)
- Height: 520 mm (20.47 in)
- Depth: 695 mm (27.36 in)
- Weight: 47 kg (103.62 lbs)