Top of the page

Atlas IED Four-Channel, 2600-Watt Commercial Amplifier

Item No. HPA2604
Four-Channel, 2600-Watt Commercial Amplifier The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V distributed systems and professional applications that require amplifiers to handle 4 and 8 ohm loads. The HPA is compact and lightweight in c
Login for Dealer Pricing
Click below for direct download from our manufacturers.

Description

Four-Channel, 2600-Watt Commercial Amplifier

The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V distributed systems and professional applications that require amplifiers to handle 4 and 8 ohm loads.

The HPA is compact and lightweight in comparison to other models delivering the similar power levels. The HPA Series features generation II Class I Output topology that gives the efficiency close to a Class D amplifier with the sound quality of a Class AB amplifier. The power supply is switch mode global auto sensing gen 3 design that maintains a stable output during fluctuating power conditions. The power supply and output stage collectively are designed to deliver exceptional dynamic high output voltage and current to virtually any speaker load.

The HPA Series features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante™ 2 or 4-channel digital audio interface. Cooling is not an issue because of the unique output stage low resistance direct couple thermal transfer design. HPA also is energy efficient and meets Energy Star standards with only drawing 1W of power in standby mode.

Whether your application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the AtlasIED HPA Series is the answer for high power/cost effective amplification need.

Features
  • Four Output Channels
  • 4Ω, 8Ω, 70V, & 100V Operation
  • Balanced Inputs
  • Dante™ Accessory Card Slot
  • Fault Reporting
  • Remote Turn On
  • Detented Attenuators with Security Cover
  • Auto Sensing 100V-240V~ AC Mains Power Supply
  • Meets Energy Star Standards 1W Standby Mode
Specifications
  • Power Output:
    70.7V: 4 x 650W
    100V: 4 x 650W
    8Ω: 4 x 650W
    4Ω: 4 x 650W
    2Ω: NA
    8Ω Bridged: NA
    1Ω RMS Power Output: NA
  • Frequency Response: 20Hz - 20kHz
  • THD: <0.15%
  • Channels: Four
  • Signal To Noise Ratio: >70dB
  • Connector Type: Terminal Block & Phoenix
  • Number Of Fans: 1 - Variable Speed
  • BTU All Channels Driven AES: 2132.5 BTU (70.7V, 120VAC)
  • Max Current All Channels Driven Continuous: 26.9A
  • Rack Units: 2 RU
  • Height: 3.5" (89mm)
  • Width: 19" (483mm)
  • Depth: 15" (381mm)
  • Voltage Compatibility: Universal
  • Weight: 22 lbs. (10kg)
  • Finish: Black
  • Warranty Period: 36 months from date of purchase

Product Details

RRP
$ 5099.00
Brand
Atlas IED
Product Group
HPA Amplifier
Product Category
Amplifier - Install
Item No. HPA2604

Atlas IED Four-Channel, 2600-Watt Commercial Amplifier

Four-Channel, 2600-Watt Commercial Amplifier The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V distributed systems and professional applications that require amplifiers to handle 4 and 8 ohm loads. The HPA is compact and lightweight in c
Login for Dealer Pricing

Product Details

RRP
$ 5099.00
Brand
Atlas IED
Product Group
HPA Amplifier
Product Category
Amplifier - Install
Click below for direct download from manufacturer.

Description

Four-Channel, 2600-Watt Commercial Amplifier

The AtlasIED High Power Amplifier “HPA” Series has been designed to be versatile for uses in both commercial 70V distributed systems and professional applications that require amplifiers to handle 4 and 8 ohm loads.

The HPA is compact and lightweight in comparison to other models delivering the similar power levels. The HPA Series features generation II Class I Output topology that gives the efficiency close to a Class D amplifier with the sound quality of a Class AB amplifier. The power supply is switch mode global auto sensing gen 3 design that maintains a stable output during fluctuating power conditions. The power supply and output stage collectively are designed to deliver exceptional dynamic high output voltage and current to virtually any speaker load.

The HPA Series features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante™ 2 or 4-channel digital audio interface. Cooling is not an issue because of the unique output stage low resistance direct couple thermal transfer design. HPA also is energy efficient and meets Energy Star standards with only drawing 1W of power in standby mode.

Whether your application is a large distributed constant voltage sound system or a high SPL sound reinforcement system, the AtlasIED HPA Series is the answer for high power/cost effective amplification need.

Features
  • Four Output Channels
  • 4Ω, 8Ω, 70V, & 100V Operation
  • Balanced Inputs
  • Dante™ Accessory Card Slot
  • Fault Reporting
  • Remote Turn On
  • Detented Attenuators with Security Cover
  • Auto Sensing 100V-240V~ AC Mains Power Supply
  • Meets Energy Star Standards 1W Standby Mode
Specifications
  • Power Output:
    70.7V: 4 x 650W
    100V: 4 x 650W
    8Ω: 4 x 650W
    4Ω: 4 x 650W
    2Ω: NA
    8Ω Bridged: NA
    1Ω RMS Power Output: NA
  • Frequency Response: 20Hz - 20kHz
  • THD: <0.15%
  • Channels: Four
  • Signal To Noise Ratio: >70dB
  • Connector Type: Terminal Block & Phoenix
  • Number Of Fans: 1 - Variable Speed
  • BTU All Channels Driven AES: 2132.5 BTU (70.7V, 120VAC)
  • Max Current All Channels Driven Continuous: 26.9A
  • Rack Units: 2 RU
  • Height: 3.5" (89mm)
  • Width: 19" (483mm)
  • Depth: 15" (381mm)
  • Voltage Compatibility: Universal
  • Weight: 22 lbs. (10kg)
  • Finish: Black
  • Warranty Period: 36 months from date of purchase