inDESIGN 2 Channel Power Amp 2 x 1200w @ 8 2 x 1850w @ 4, Class H, 2RU
Description
2x 1200W 2-Channel Power Amplifier, 2RU
The inDESIGN iD-HC power amplifier series is a high powered efficient 2 Stage, Class H amplifier design-built for demanding mobile live sound and permanent installation amplification applications.
Each model features min. 4 ohms load, bridging @ 8 ohms, switchable input sensitivity, soft start, DC protection, short circuit protection, clip limiter and thermal overload protection.
Maintenance is a breeze with removal – washable front filters via the front panel. The weight is due to large transformers – sorry about that... at least your amps will have a long service life!
Specifications
- Number of Channels: 2
- Power RMS Watts 8Ω Stereo: 1200W
- Power RMS Watts 4Ω Stereo: 1850W
- Power RMS Watts 8Ω Bridged: 3900W
- Amplifier Topology Category: 2 STAGE, CLASS H
- Frequency Response: 20Hz - 20kHz
- THD: 0.08%
- S/N Rate: >108dB
- Slew Rate: >20V/μs
- Damping Factor: 300 (100Hz)
- Input Connections:
2x XLR3F
PIN2 = HOT (+)
PIN3 = COLD (-)
PIN3 = GROUND - Signal Link Connection:
2x XLR3M
PIN2 = HOT (+)
PIN3 = COLD (-)
PIN3 = GROUND - Input Impedance (unbal/bal): 10kΩ / 20kΩ
- Input Sensitivity VAC: 0.77V / 1V / 1.44V
- Output Connections & Wiring:
SPEAKON NL4 x2
CH1 +1/-1 STEREO MODE
CH2 +1/-1 STEREO MODE
CH1 +1/-1 INPUT LINK MODE
CH2 +1/-1 INPUT LINK MODE
CH1 +1/+2 BRIDGE MODE
CH2 NOT CONNECTED IN BRIDGE MODE - Voltage Gain: 38dB
- Cooling Flow: Front to Rear (via dual thermo controlled fans)
- Protection: Soft Start, DC Protection, Short Circuit, Clip Limiter, Thermal Overload
- Mains Power Requirements: 230V/50Hz +/- 10%
- Mains Power Connection: 15 AMP PLUG / attached cable
- Power Consumption RMS @ Stereo 4Ω:
AH/Watts @ Idle: 0.17A / 39.1W
AH/Watts @ 1/8th Power: 2.9A / 667W
AH/Watts @ 1/3rd Power: 7.5A / 1725W
AH/Watts @ Full Power: 14.3A / 3289W - Product Dimensions (2RU) WxDxH : 483 x 456 x 88 mm
- Product Weight: 25.6kg
- Carton Dimensions WxDxH: 570 x 560 x 145 mm
- Gross Weight: 28kg
* Disclaimer: Instructions and specifications are correct at time of printing. Information within may be subject to change without notice.
Product Details
- RRP
- $ 1899.00
- Brand
- inDESIGN
- Product Group
- HC Series
- Product Category
- Amplifier - Install
inDESIGN 2 Channel Power Amp 2 x 1200w @ 8 2 x 1850w @ 4, Class H, 2RU
Product Details
- RRP
- $ 1899.00
- Brand
- inDESIGN
- Product Group
- HC Series
- Product Category
- Amplifier - Install
Description
2x 1200W 2-Channel Power Amplifier, 2RU
The inDESIGN iD-HC power amplifier series is a high powered efficient 2 Stage, Class H amplifier design-built for demanding mobile live sound and permanent installation amplification applications.
Each model features min. 4 ohms load, bridging @ 8 ohms, switchable input sensitivity, soft start, DC protection, short circuit protection, clip limiter and thermal overload protection.
Maintenance is a breeze with removal – washable front filters via the front panel. The weight is due to large transformers – sorry about that... at least your amps will have a long service life!
Specifications
- Number of Channels: 2
- Power RMS Watts 8Ω Stereo: 1200W
- Power RMS Watts 4Ω Stereo: 1850W
- Power RMS Watts 8Ω Bridged: 3900W
- Amplifier Topology Category: 2 STAGE, CLASS H
- Frequency Response: 20Hz - 20kHz
- THD: 0.08%
- S/N Rate: >108dB
- Slew Rate: >20V/μs
- Damping Factor: 300 (100Hz)
- Input Connections:
2x XLR3F
PIN2 = HOT (+)
PIN3 = COLD (-)
PIN3 = GROUND - Signal Link Connection:
2x XLR3M
PIN2 = HOT (+)
PIN3 = COLD (-)
PIN3 = GROUND - Input Impedance (unbal/bal): 10kΩ / 20kΩ
- Input Sensitivity VAC: 0.77V / 1V / 1.44V
- Output Connections & Wiring:
SPEAKON NL4 x2
CH1 +1/-1 STEREO MODE
CH2 +1/-1 STEREO MODE
CH1 +1/-1 INPUT LINK MODE
CH2 +1/-1 INPUT LINK MODE
CH1 +1/+2 BRIDGE MODE
CH2 NOT CONNECTED IN BRIDGE MODE - Voltage Gain: 38dB
- Cooling Flow: Front to Rear (via dual thermo controlled fans)
- Protection: Soft Start, DC Protection, Short Circuit, Clip Limiter, Thermal Overload
- Mains Power Requirements: 230V/50Hz +/- 10%
- Mains Power Connection: 15 AMP PLUG / attached cable
- Power Consumption RMS @ Stereo 4Ω:
AH/Watts @ Idle: 0.17A / 39.1W
AH/Watts @ 1/8th Power: 2.9A / 667W
AH/Watts @ 1/3rd Power: 7.5A / 1725W
AH/Watts @ Full Power: 14.3A / 3289W - Product Dimensions (2RU) WxDxH : 483 x 456 x 88 mm
- Product Weight: 25.6kg
- Carton Dimensions WxDxH: 570 x 560 x 145 mm
- Gross Weight: 28kg
* Disclaimer: Instructions and specifications are correct at time of printing. Information within may be subject to change without notice.