Pliant Single-Ear Universal Fit In-Ear Headset with noise cancelling electret microphone and a 4-Pin Female XLR connector
- Brand
- Pliant
- Product Group
- CrewCom
- Product Category
- Intercom - CrewCom
CrewCom In-Ear Universal Fit Electret Headset 4-Pin Female XLR
With the ultimate comfort and flexibility in mind, the CrewCom In-Ear Universal Fit Electret Headset features a 4-Pin Female XLR connector, noise cancelling uni-directional noise-cancelling electret microphone, and can be used with CrewCom full-sized Radio Packs. The headset not only provides great comfort but also flexibility by utilising silicone ear concha locks and ear buds for ether left ear or right ear orientation. In addition, the in-ear headset also supports custom ear moulds specifically designed for a individual user’s ear from custom ear mould manufacturers Sensaphonics and Coda Room Audio.
In the Box
- In-Ear Headset
- Rubber Earbuds x3 (Small, Medium, Large)
- Foam Earbuds x3 (Small, Medium, Large)
- Generic Silicone Ear Moulds x2 (Left, Right)
- Magnetic Cable Clip
- Zippered Pouch Soft Case
Features
- Light weight design and crystal-clear sound
- Sport-style microphone with in-ear (left or right) holder
- Flexible ultra-light boom
- Custom earmould compatible (Sensaphonics & Coda Room Audio)
- Uni-directional noise cancelling electret microphone
- Flexible silicone outer-ear holder for increased security
- Replaceable windscreen and rubber or foam ear buds
- 4-Pin Female XLR Connector
Specifications
Microphone- Type: Electret
- Directional Characteristic: Uni-Directional (Noise Cancelling)
- Sensitivity: -42 ±4dB (0db=1V.Pa, 1KHz)
- RL=2.2k Ohms
- Vcc=2.0V.
- Impedance: Less than 2.2k Ohms at 1kHz \ Frequency Response: 100Hz – 10kHz (+/- 10dB)
- S/N Ratio: More than 58dB at 1kHz (1 Pa (94dB SPL) A weighted network)
- Input Sound Level: Max. 100dB S.P.L (at 1KHz, Distortion <3%)
- Standard Operating Bias Voltage: 2.0V [Min. 1V, Max. 10V]
- Current Consumption: 500µA (RL=2.2k Ohms, Vcc=2.0V)
- Impedance: 32 Ohms ± 15%
- Resonance Freq.: 1.2kHz ± 20%
- Power Rating: Nominal 0.5W / Max. 0.7W
- Sensitivity (SPL): 83dB ± 3dB
- Total Harmonic Distortion: Less than 10% from 1kHz., 0.1W
- Frequency Response: 600Hz to 18kHz (± 8dB)
- Polarity: When a positive DC current is applied to the terminal marked (+) the diaphragm shall move forward
Pliant Single-Ear Universal Fit In-Ear Headset with noise cancelling electret microphone and a 4-Pin Female XLR connector
- Brand
- Pliant
- Product Group
- CrewCom
- Product Category
- Intercom - CrewCom
CrewCom In-Ear Universal Fit Electret Headset 4-Pin Female XLR
With the ultimate comfort and flexibility in mind, the CrewCom In-Ear Universal Fit Electret Headset features a 4-Pin Female XLR connector, noise cancelling uni-directional noise-cancelling electret microphone, and can be used with CrewCom full-sized Radio Packs. The headset not only provides great comfort but also flexibility by utilising silicone ear concha locks and ear buds for ether left ear or right ear orientation. In addition, the in-ear headset also supports custom ear moulds specifically designed for a individual user’s ear from custom ear mould manufacturers Sensaphonics and Coda Room Audio.
In the Box
- In-Ear Headset
- Rubber Earbuds x3 (Small, Medium, Large)
- Foam Earbuds x3 (Small, Medium, Large)
- Generic Silicone Ear Moulds x2 (Left, Right)
- Magnetic Cable Clip
- Zippered Pouch Soft Case
Features
- Light weight design and crystal-clear sound
- Sport-style microphone with in-ear (left or right) holder
- Flexible ultra-light boom
- Custom earmould compatible (Sensaphonics & Coda Room Audio)
- Uni-directional noise cancelling electret microphone
- Flexible silicone outer-ear holder for increased security
- Replaceable windscreen and rubber or foam ear buds
- 4-Pin Female XLR Connector
Specifications
Microphone- Type: Electret
- Directional Characteristic: Uni-Directional (Noise Cancelling)
- Sensitivity: -42 ±4dB (0db=1V.Pa, 1KHz)
- RL=2.2k Ohms
- Vcc=2.0V.
- Impedance: Less than 2.2k Ohms at 1kHz \ Frequency Response: 100Hz – 10kHz (+/- 10dB)
- S/N Ratio: More than 58dB at 1kHz (1 Pa (94dB SPL) A weighted network)
- Input Sound Level: Max. 100dB S.P.L (at 1KHz, Distortion <3%)
- Standard Operating Bias Voltage: 2.0V [Min. 1V, Max. 10V]
- Current Consumption: 500µA (RL=2.2k Ohms, Vcc=2.0V)
- Impedance: 32 Ohms ± 15%
- Resonance Freq.: 1.2kHz ± 20%
- Power Rating: Nominal 0.5W / Max. 0.7W
- Sensitivity (SPL): 83dB ± 3dB
- Total Harmonic Distortion: Less than 10% from 1kHz., 0.1W
- Frequency Response: 600Hz to 18kHz (± 8dB)
- Polarity: When a positive DC current is applied to the terminal marked (+) the diaphragm shall move forward