Compact 2-way networked loudspeaker, white

The U3N is a high-performance, 2-way loudspeaker providing exceptional directivity control and electroacoustic efficiency. Suitable for both mobile and installation applications, this point-source networked cabinet represents the next generation of d&b technology and innovation. It features dual 5" drivers in a bipole arrangement with a 0.75" compression driver mounted onto a 100° x 65° horn that can be rotated 90° without an extra tool (patent pending). The U3N leverages new industrial design and manufacturing techniques for state-of-the-art horn geometry and advanced bass-reflex ports to deliver full bandwidth and extended LF output (-5dB @ 55Hz with CPL). The U3N loudspeaker provides 65° vertical directivity control starting from 500Hz, matched with 100° horizontal dispersion.

The U3N supports hybrid topology schemes and accepts either AC or PoE++, as well as both power sources simultaneously, enabling the mixing of passive and networked workflows controlled as one system. A single network cable can supply the loudspeaker with power, signal, remote monitoring and control, and two will provide power and signal redundancy (2x PoE++ and 2x Milan).

The cabinet is made of highly durable partially recycled ABS and carries an IP54 rating for dust and weather resistance. The front is protected by a rigid metal grille and an acoustically transparent foam. The back has a handle and M8 threaded inserts for attaching d&b rigging hardware designed specifically for either mobile or install uses. The U3N can be both mounted or flown, and in single-cable operation it can easily be placed where traditional power is not easily available, bringing significant savings in time and infrastructure costs. When operating on PoE++ U3N can be powered by DN2, the d&b proprietary AVB MILAN PoE++ Network Switch for a rugged, reliable solution or other 3rd party switches with equivalent performance capabilities and certifications.

The U3N is also available in a passive variant (U3).

Features

• Components: 2x 5" / 0.75"
• Dispersion: 100° x 65° rotatable
• SPL max: 128dB
• Weight: 7.5kg / 16.5lb

Specifications

• Frequency response (-5dB standard): 61Hz - 18kHz
• Frequency response (-5dB CUT mode): 105Hz - 18kHz
• Frequency response (-10dB standard, IEC60268): 52Hz - 19kHz
• Frequency response (-10dB CUT mode, IEC60268): 80Hz - 19kHz
• Max. sound pressure [1]: 128dB

• Nominal dispersion angle (H x V): 100° x 65°
• Components:
  2x 5" driver with neodymium magnet
  1x 0.75" exit HF compression driver with 1.4" coil
  Rotatable CD horn

• Equaliser: 2 user definable 16-band equaliser
• Latency analog input: 1.1ms
• Frequency generator: Pink noise or sine wave 10Hz to 20kHz
• Delay: 1.1ms to 1 sec.

• INPUT ANALOG: 3 pin XLR female
• ANALOG LINK: 3 pin XLR male, parallel to input
• MILAN INPUT: 1 stream with up to 8 channels @ 48/96kHz
• Network Connection: 2x RJ 45 (etherCON®)
• Network Switch: integrated 2-port, 100 Mbit/1 Gbit
• ETH1/PRI: Milan™, Remote control via R1 star topology
• ETH2/SEC: Milan™ redundancy only, no remote control star topology

• Mains connector: powerCON® TRUE1 TOP In and Thru
• Power supply: Switched mode power supply with automatic mains range selection and active Power Factor Correction (PFC).
• Rated mains voltage: 100 - 240V, 50 - 60Hz

• Dimensions (H x W x D): 16.2 x 7.4 x 9.6" / 411 x 187 x 245 mm
• Weight: 16.5lb / 7.5kg