LOOP AMPLIFIER SYSTEM

Under Counter Kit

Our Under the Counter Loop System provides clear communication with hearing instrument wearers, especially where background noise is a problem or clear speech is restricted.

It has a flexible, discreet hearing loop aerial that can be bent to shape, allowing it to be tailored to many different counters.

Includes:

• HLD2 loop driver – Our innovative 1 to 1 Hearing Loop Driver is a special type of audio amplifier designed especially for driving hearing loops.
• IL-SN hearing loop sign – Signs are available as either stand-up signs or stickers, available for both portable and fixed loops. Stickers are available with either an adhesive back or an adhesive front.
• IL-AE99 loop aerial – Our Counter Hearing Loop Aerial is for use with the Under the Counter Loop System, which is fixed under desks or counters.
• STS-M98 cardioid LED halo desktop mic with short brass stem – Our Halo Microphone with Stem features noise cancelling and a halo light indication at the base of the microphone stem. The halo lights up green when the system is working correctly and red when a fault is detected. It can be either screwed down or mounted using a standard self-adhesive pad, while the microphone is available in metal or without a halo LED indication.
• PS-55-01 power supply – The PS-55 Power Supply is a Level VI power supply for use with our Under the Counter Loop System, Above the Counter Loop System and Home Loop Kit.

Features

• Microprocessor control
• Energy-saving “green” standby mode
• Advanced audio processing features AGC, compression and noise gate
• Constant-current loop drive
• Continuous self-testing
• Power and LED status indication
• Magnetic field range of 1200mm

Specifications

• Dimensions:
  Height – 116mm (4.57”)
  Width – 116mm (4.57”)
  Depth – 40mm (1.57”)
• Weight: 120g (0.26lbs)
• Construction: ABS Plastic
• Finish: Matt Black Fine Texture
• Supply voltage: 12-14 VDC
• Quiescent current: 100mA typical
• Operating current: 2A typical on speech peaks
• Power switch: Push on - push off (tact switch under membrane)
• Microphones: Electret, supply 5V via 2.2K load resistor
• Speaker output power: RMS: 2.5W / 8Ω 4.4W / 4Ω
• Loop drive compliance: Constant current, bounded by 4V RMS & 2A RMS
• Total harmonic distortion: <5% (loop and speakers)

• Dimensions:
  Height – 70mm (2.76”)
  Width – 40mm (1.58”)
  Length – 100mm (3.94”)
• Weight: 80g (0.18lbs)
• Construction: ABS Plastic & Metal
• Finish: Pin Seal Texture Satin Black
• Directional Response: Omnidirectional
• Frequency Response: 20Hz - 20kHz
• Sensitivity: -42±3dB
• Impedance (Ω): 2.2K
• S/N Ratio (dBA): 58

• Dimensions: 3.96m (156”) length cable which can be moulded on site to required size/shape by installers
• Weight: 100g (0.22lbs)
• Construction: Copper Wire with Black Protective Covering
• Finish: Black PVC
• Magnetic field range approximately 1200mm