d&b audiotechnik Y10P Loudspeaker NLT4F/M
Click below for direct download from our manufacturers.
Description
High performance 2-way passive point source loudspeaker
The compact, 2-way passive Y10P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 110° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation. The Y10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the Y-Series, either ground stacked or flown. The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The cabinet incorporates a pair of handles whilst M10 threaded inserts are provided for attaching d&b rigging hardware. Additionally, two further M10 sockets accept the 8mm load pin to expand the mounting options.
Amplifiers
The following amplifiers can be used to drive the Y10P:- Mobile: D20, D40, D80
- Installation: 40D
Features
- Components 2 x 8"/1.4"
- Dispersion 110° x 40°
- SPLmax 136 dB
- Weight 18 kg / 40 lb
Specifications
System data- Frequency response (-5 dB standard): 59 Hz - 18 kHz
- Frequency response (-5 dB CUT mode): 118 Hz - 18 kHz
-
Max. sound pressure [1]:
with 10D: 131 dB
with D20/30D: 134 dB
with D40/D80/40D: 136 dB - Cabinets per amplifier channel: 2
- Configuration: High performance 2-way passive point source loudspeaker
- Nominal impedance: 8 Ω
- Power handling capacity (RMS/peak 10 ms): 400/1600 W
- Nominal dispersion angle (h x v): 110° x 40°
-
Components:
2 x 8" driver with neodymium magnet
1.4" exit compression driver
passive crossover network - Connections: 2 x NLT4 F/M
- Dimensions (H x W x D): 580 x 257 x 341 mm / 22.8 x 10 x 13.4"
- Weight: 18 kg / 40 lb
Product Details
- RRP
- $ 12531.00
- Brand
- d&b audiotechnik
- Product Group
- Y Series
- Product Category
- Loudspeakers - Point Source
d&b audiotechnik Y10P Loudspeaker NLT4F/M
Product Details
- RRP
- $ 12531.00
- Brand
- d&b audiotechnik
- Product Group
- Y Series
- Product Category
- Loudspeakers - Point Source
Description
High performance 2-way passive point source loudspeaker
The compact, 2-way passive Y10P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 110° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation. The Y10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the Y-Series, either ground stacked or flown. The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The cabinet incorporates a pair of handles whilst M10 threaded inserts are provided for attaching d&b rigging hardware. Additionally, two further M10 sockets accept the 8mm load pin to expand the mounting options.
Amplifiers
The following amplifiers can be used to drive the Y10P:- Mobile: D20, D40, D80
- Installation: 40D
Features
- Components 2 x 8"/1.4"
- Dispersion 110° x 40°
- SPLmax 136 dB
- Weight 18 kg / 40 lb
Specifications
System data- Frequency response (-5 dB standard): 59 Hz - 18 kHz
- Frequency response (-5 dB CUT mode): 118 Hz - 18 kHz
-
Max. sound pressure [1]:
with 10D: 131 dB
with D20/30D: 134 dB
with D40/D80/40D: 136 dB - Cabinets per amplifier channel: 2
- Configuration: High performance 2-way passive point source loudspeaker
- Nominal impedance: 8 Ω
- Power handling capacity (RMS/peak 10 ms): 400/1600 W
- Nominal dispersion angle (h x v): 110° x 40°
-
Components:
2 x 8" driver with neodymium magnet
1.4" exit compression driver
passive crossover network - Connections: 2 x NLT4 F/M
- Dimensions (H x W x D): 580 x 257 x 341 mm / 22.8 x 10 x 13.4"
- Weight: 18 kg / 40 lb