d&b audiotechnik Yi-SUB Subwoofer
Click below for direct download from our manufacturers.
Description
Installation specific high performance flyable cardioid subwoofer
The Yi-SUB is an actively driven cardioid subwoofer powered by a single amplifier channel. The Yi-SUB is the installation version of the Y-SUB and differs only in cabinet construction, finish and mounting hardware. It houses two long excursion neodymium drivers in an integrated cardioid setup, an 18” driver in a bass-reflex chamber facing to the front and a 12” driver in a two chamber bandpass design radiating towards the rear. The cardioid dispersion pattern resulting from this arrangement avoids the distribution of energy behind the system, providing the greatest accuracy of low frequency reproduction and reducing the energy dispersed into unwanted areas. The Yi-SUB is fitted with three point rigging hardware and can be flown in a column of purely Yi subwoofers, at the top of a Yi array or used in a ground stacked setup. The cabinet is constructed from marine plywood and has an impact resistant paint finish, while Weather Resistant (WR) and Special Color (WR) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.
Amplifiers
The following amplifiers can be used to drive the Yi-SUB:
- Installation: 10D, 30D, 40D
Features
- Components 18"/12"
- Dispersion Cardioid
- SPLmax 134 dB
- Weight 49 kg / 108 lb
Specifications
System data- Frequency response (-5 dB standard): 39 Hz - 140 Hz
- Frequency response (-5 dB 100 Hz mode): 39 Hz - 110 Hz
-
Max. sound pressure [1]:
with 10D: 128 dB
with D20/30D: 131 dB
with D40/D80/40D [2]: 134 dB - Cabinets per amplifier channel: 2
- Configuration: Installation specific high performance flyable cardioid subwoofer
- Nominal impedance: 8 Ω
- Power handling capacity (RMS/peak 10 ms): 600/2400 W
- Splay angle settings: 0° and 2.5°
-
Components:
1 x 18" driver with neodymium magnet
1 x 12" driver with neodymium magnet -
Connections: 2 x NL4
screw terminal block
- Dimensions (H x W x D): 500 x 630 x 700 mm / 19.7 x 24.8 x 27.6"
- Weight: 49 kg / 108 lb
[2] When operated with D40/40D, the value applies to one loudspeaker per channel
Product Details
- RRP
- $ 13058.00
- Brand
- d&b audiotechnik
- Product Group
- Y Series
- Product Category
- Loudspeakers - Subwoofers
d&b audiotechnik Yi-SUB Subwoofer
Product Details
- RRP
- $ 13058.00
- Brand
- d&b audiotechnik
- Product Group
- Y Series
- Product Category
- Loudspeakers - Subwoofers
Description
Installation specific high performance flyable cardioid subwoofer
The Yi-SUB is an actively driven cardioid subwoofer powered by a single amplifier channel. The Yi-SUB is the installation version of the Y-SUB and differs only in cabinet construction, finish and mounting hardware. It houses two long excursion neodymium drivers in an integrated cardioid setup, an 18” driver in a bass-reflex chamber facing to the front and a 12” driver in a two chamber bandpass design radiating towards the rear. The cardioid dispersion pattern resulting from this arrangement avoids the distribution of energy behind the system, providing the greatest accuracy of low frequency reproduction and reducing the energy dispersed into unwanted areas. The Yi-SUB is fitted with three point rigging hardware and can be flown in a column of purely Yi subwoofers, at the top of a Yi array or used in a ground stacked setup. The cabinet is constructed from marine plywood and has an impact resistant paint finish, while Weather Resistant (WR) and Special Color (WR) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.
Amplifiers
The following amplifiers can be used to drive the Yi-SUB:
- Installation: 10D, 30D, 40D
Features
- Components 18"/12"
- Dispersion Cardioid
- SPLmax 134 dB
- Weight 49 kg / 108 lb
Specifications
System data- Frequency response (-5 dB standard): 39 Hz - 140 Hz
- Frequency response (-5 dB 100 Hz mode): 39 Hz - 110 Hz
-
Max. sound pressure [1]:
with 10D: 128 dB
with D20/30D: 131 dB
with D40/D80/40D [2]: 134 dB - Cabinets per amplifier channel: 2
- Configuration: Installation specific high performance flyable cardioid subwoofer
- Nominal impedance: 8 Ω
- Power handling capacity (RMS/peak 10 ms): 600/2400 W
- Splay angle settings: 0° and 2.5°
-
Components:
1 x 18" driver with neodymium magnet
1 x 12" driver with neodymium magnet -
Connections: 2 x NL4
screw terminal block
- Dimensions (H x W x D): 500 x 630 x 700 mm / 19.7 x 24.8 x 27.6"
- Weight: 49 kg / 108 lb
[2] When operated with D40/40D, the value applies to one loudspeaker per channel