LST 10mm SMD LED display. Outdoor. 960x960mm. IP66. Per SQM

Applications

• Commercial street signage
• Shopping malls
• Transit advertising

Features

• Lighter and Thinner
  100mm thinner.
  Weight of single cabinet ≤ 26.5kg.
  Standard: Die-cast aluminium bottom case.
• Stable Performance
  Superior heat dissipation.
  High tolerance of module.
• Energy-saving
  Using low-voltage energy-saving design, the same configuration saves 12% energy than conventional displays.
• Front IP66 and Rear IP65 Protection

Specifications

• Model:  LST10
• Pixel Configuration: MD2727
• Pixel Pitch(mm): 10
• Pixel matrix per module: 48x32
• Pixel density (pixels/sq.m.): 10,000
• Cabinet Dimensions (WxHxD)/(mm): 960x960x100
• Module Dimensions (WxH)/(mm): 480x320
• Panel material: Die-cast aluminium
• Cabinet weight (kg/panel): 26.5
• Colour Greyscale (Bit): 14bit
• Grey Scale per Colour (level): 16,384
• Refresh Rate (Hz): 3,840
• Driving Type: 1/2
• Signal Transmission Distance (m): CAT5 cable: ＜100 m; Single mode fibre: ＜10 km
• Brightness (nits): 5500
• Optimal Horizontal Viewing Angle (°): 150
• Optimal Vertical Viewing Angle (°): Up 50/Down 60
• Contrast ratio: 6,000:1
• AC Input Voltage (V): AC: 100V～240V
• AC Input Power Maximum Value (W/㎡): 600
• AC Input Power Typical Value (W/㎡): 200
• Storage Temperature (℃): -40–60
• Working Temperature (℃) -20–50
• IP rating (Front/Rear): IP66/IP65
• Storage Humidity (RH): 10%~90% non-condensing
• Working Humidity (RH): 10%~90% non-condensing
• Lifetime Typical Value (hrs): 100,000
• Cabinet installation: Fixed

Note: Specifications are for reference only and are subject to change without notice.

Power consumption tolerance: ±15%, in accordance with the specific installation.